2 Person Infrared Sauna for Home – Maxxus Seattle Low EMF

Dimensions

• Overall Width (outer): 48"
• Overall Depth (outer): 42"
• Overall Height: 75"
• Interior Width: 44"
• Interior Depth: 38"
• Interior Height: 68"

Materials & Build

• Exterior: Reforested Canadian hemlock
• Interior: Natural hemlock wood construction
• Door: Clear tempered glass
• Design: cabin style, indoor use only
• Construction: Clasp-together panel system

Heating System

• Heating Type: Far infrared carbon panels
• Number of Heaters: 6 panels
• EMF Rating: Low EMF (approx. 5–10 mG near panels)
• Heat Distribution: Full-body panel placement (walls, bench, floor)
• Bench & Floor Heaters: Lower-output supplemental panels for balanced heat
• Temperature Range: ~118°F–132°F typical use
• Max Temperature: Up to ~140°F
• Estimated Heat-Up Time: ~20–30 minutes to reach typical range

Electrical Requirements

• Power Supply: 120V / 15-amp dedicated circuit
• Plug Type: Standard household plug (non-GFCI dedicated receptacle required)
• Installation: Plug-and-play and/or consult with certified electrician (dedicated receptacle requirement)

Controls & Features

• Control Panels: Interior LED control system
• Control Functions: Time, temperature, lighting, and session controls
• Lighting: Chromotherapy color lighting system (7 colors)
• Red Light Therapy: Integrated with lighting system
• Audio: Bluetooth/MP3 + AUX input with built-in speakers

Ventilation & Airflow

• Vent Type: Roof vent
• Purpose: Airflow and temperature regulation

Capacity & Use

• Capacity: 2 person
• Primary Use: Indoor home use only
• Session Range: Designed for consistent daily use
• Recommended Use Cycle: Up to 3 hours continuous use followed by cooldown period

Weight & Shipping

• Sauna Weight: ~275 lbs
• Shipping Weight: ~415 lbs
• Packaging: Ships in 2 boxes

Installation Requirements

• Placement: Indoor only
• Surface: Flat, level flooring
• Assembly: Two-person recommended
• Build Type: Tool-assisted clasp-together panel assembly
• Quality Note: Panels are pre-tested prior to shipment

Warranty

• Coverage: 1–5 year limited warranty
• Scope: Structure, heaters, and electronics
• Limitations: Indoor use only; non-transferable

Designed specifically for indoor home use, the Maxxus Seattle Low EMF Infrared Sauna features a compact cabin design suited for residential spaces such as bedrooms, basements, or dedicated wellness areas. With an exterior footprint of approximately 48 inches wide by 42 inches deep and a height of 75 inches, it provides a space-efficient solution for incorporating a sauna into a variety of indoor layouts.

The cabin configuration supports full-body infrared use within a 1–2 person interior, allowing for both individual sessions and shared use as needed. Its panel-based construction supports placement in finished indoor environments while maintaining a structured layout that promotes consistent heat distribution throughout the space.

When planning installation, adequate clearance should be considered for door swing, ventilation, and safe entry and exit, along with ensuring access to a dedicated 120V / 15-amp outlet for reliable operation. Overall, the Seattle model is well-suited for homeowners seeking a compact indoor sauna that balances efficient use of space, straightforward installation, and consistent performance in a residential setting.

Product color and finish may vary slightly from on-screen images due to lighting conditions during photography, differences in device display settings, and the natural variation in wood grain/color inherent to Canadian hemlock.

The Maxxus Seattle Sauna is backed by a limited manufacturer warranty from Golden Designs, Inc., covering the wood structure, heating elements, and electronics against defects in materials and workmanship from the original date of purchase. Coverage periods vary by component, with heating elements and electronics covered for up to 5 years, and the wood structure and accessories covered for 1 year. Proof of purchase is required, and coverage applies to the original purchaser at the original installation location.

This sauna is designed for indoor use only. Outdoor placement, exposure to weather or extreme conditions, improper installation, misuse, modifications, or repairs by unauthorized parties will void the warranty. Normal characteristics of wood, including minor expansion, contraction, or surface cracking, are not considered defects.

Warranty service requires returning any defective parts to Golden Designs, Inc., with shipping and associated costs the responsibility of the purchaser. The manufacturer is not liable for incidental or consequential damages, and warranty coverage does not transfer upon resale or relocation. Additional rights may vary by state.

For any support needs, customers are encouraged to contact Golden Designs, Inc. (manufacturer) directly using the information provided with their order.

Please see the SanaVi Warranty Policy Page for further details and information.

Golden Designs, Inc. supports its sauna line with established customer service operations based in Ontario, California, offering assistance via phone and email during standard business hours. As a long-standing North American supplier with distribution through major retailers, the company maintains an organized support structure to assist with product questions, replacement parts, and warranty-related inquiries.

Please refer to the Maxxus Seattle Sauna User Manual included in your delivery for product related safety information.

For important health and safety information, please review SanaVi's Medical & Safety Disclaimer Page before using this equipment.

By purchasing or using products distributed by SanaVi Health Systems LLC, customers acknowledge that they have read and understood this Medical & Safety Disclaimer and agree to use all equipment responsibly and in accordance with Manufacturer guidance.

What is the Maxxus Seattle 2 person infrared sauna?

The Maxxus Seattle 2 person infrared sauna is a compact indoor sauna designed for home use that uses far infrared heating panels to deliver consistent, full-body warmth. As a 2 person infrared sauna, it supports individual or shared sessions while fitting within a space-efficient footprint.

How does a 2 person infrared sauna work?

A 2 person infrared sauna works by using far infrared heat to warm the body more directly rather than heating the surrounding air to high temperatures. This allows for effective sessions at lower ambient temperatures while maintaining consistent heat across the seating area.

Does the Maxxus Seattle sauna require special electrical setup?

The Maxxus Seattle sauna operates on a standard 120V / 15-amp outlet and is designed for plug-and-play use. A dedicated outlet is recommended to support consistent performance, but no specialized 240V wiring is required for installation.

Does a 120V infrared sauna heat up properly?

A 120V infrared sauna like the Maxxus Seattle is designed to operate within a practical temperature range of approximately 118°F–132°F, with the ability to reach up to 140°F. Far infrared heat warms the body directly, allowing effective sessions without requiring extreme ambient temperatures.

Is a 2 person sauna comfortable for two people?

A 2 person sauna can comfortably accommodate two users, though spacing will feel more open for a single user during longer sessions. The Seattle model is designed to balance compact size with usable interior space for shared or individual use.

What does low EMF mean in this sauna?

Low EMF in this sauna refers to reduced electromagnetic field output from the heating panels. The Maxxus Seattle sauna operates within an approximate range of 5–10 milligauss when measured 2 to 3 inches from the panels, supporting a more controlled electromagnetic environment.

Is the Maxxus Seattle sauna a good choice for home use?

The Maxxus Seattle sauna is well-suited for home use due to its compact size, 120V plug-and-play setup, and straightforward installation. It is designed to integrate into indoor spaces such as bedrooms, basements, or dedicated wellness areas.

Who makes Maxxus saunas?

Maxxus saunas are manufactured by Golden Designs, a company known for producing a range of infrared sauna systems for residential use. The Maxxus line is positioned as a practical and accessible option within their broader sauna offerings.

Are Maxxus saunas reliable?

Maxxus saunas are considered reliable for home use, with designs focused on straightforward assembly, consistent heating performance, and standard residential electrical compatibility. Reliability is supported by proper installation and routine use.

Does the Maxxus Seattle sauna include red light therapy?

The Maxxus Seattle sauna includes an integrated red light therapy feature that can be used during sessions alongside infrared heat. This allows users to incorporate both heat and light-based elements into their routine within a single system.

For proper setup, operation, and ongoing use, please refer to the Maxxus Seattle Sauna User Manual and Assembly Instruction Manual included with your unit. The manual provides step-by-step guidance on installation, program selection, safety considerations, and recommended usage to help ensure consistent and appropriate performance over time.

Routine maintenance for the Maxxus Seattle Sauna is minimal and focused on keeping the interior clean, dry, and well-ventilated after each session. Wipe down interior surfaces periodically with a soft cloth and avoid the use of harsh chemicals or excessive moisture, as the natural wood construction is designed to breathe and respond to heat.

To maintain performance, allow the sauna to fully dry between uses and keep the roof vent open as needed for airflow. Electrical components and heating panels should remain undisturbed, and the unit should always be operated according to the included user manual. With proper care and indoor use, the sauna is designed to provide consistent, long-term performance.

For complete maintenance instructions and care guidelines, please refer to the User Manual and Set Up Guide included with your delivery.

Most orders leave the warehouse within approximately two business days, with tracking information provided once shipped.

Complimentary shipping is included for all orders within the lower 48 U.S. state. Estimated delivery times are typically 3–5 business days to the West Coast, 10–12 business days to the Midwest, and 14–16 business days to the East Coast. This product may also be shipped to Alaska and Hawaii; please call 888-488-8487 for a shipping quote. Shipping is not available to U.S. territories.

All deliveries are curbside only, meaning the shipment is delivered to the end of your driveway or nearest accessible location for the carrier’s truck. Because deliveries are made via freight carrier using large trucks, it is important to ensure that your location is accessible and suitable for delivery prior to placing your order.

Upon arrival, the shipment should be inspected for any visible damage before accepting delivery. In the event of significant damage, customers are encouraged to refuse the shipment and contact Golden Designs, Inc. directly. After delivery, all cartons should be opened and inspected within 48 hours, and any concealed damage must be reported with photos to ensure proper resolution.

• Most orders ship within approximately 2 business days

• Estimated delivery times within the lower 48 U.S. states are typically 3–5 business days to the West Coast, 10–12 business days to the Midwest, and 14–16 business days to the East Coast. This product may also be shipped to Alaska and Hawaii; please call 888-488-8487 for a shipping quote.

• Delivered via freight carrier; 53 ft. semi-truck. (Watch the delivery video below to understand how freight delivery works

• Delivery is curbside only (end of driveway or nearest accessible location)

• Carrier will call 24–48 hours prior to schedule delivery window

• Delivery typically occurs within a 4-hour scheduled window

• Shipment arrives on a pallet (1 box for 1–2 person models)

• Customer is responsible for ensuring delivery access (no obstructions, tight roads, or restrictions)

• Inspect packaging upon delivery; note any visible damage on receipt

• Refuse delivery if significant damage is observed

• Open and inspect all contents within 48 hours of delivery

• Report any concealed damage with photos within 48 hours

• For complete information about shipping, delivery, freight inspection, and damage reporting, please review our Shipping, Delivery & Damage page.

We offer flexible financing through Shop Pay Installments in partnership with Affirm. To explore available payment plans, simply click the “Check your purchasing power” link below the Shop Pay logo which is located below the "Add To Cart" button, or select the “Buy with Shop” button. Available installment options will appear during checkout based on eligibility.

Additionally, if you choose PayPal at checkout, you may also access PayPal’s Buy Now, Pay Later options directly through PayPal. After selecting PayPal as your payment method, their available installment plans will be presented within the PayPal checkout environment.

Financing availability and terms are determined by the respective provider and subject to their eligibility approval.

For more details please see our Payments & Financing Page.

This product is governed by the Golden Designs-specific return terms below. Review the current SanaVi Returns & Cancellations Policy prior to purchase for complete return eligibility, fees, conditions, and instructions.

• Return window: 30 days from delivery
  
• Condition: New and unused, with original packaging
  
• Returns: Accepted for both defective and non-defective products
  
• Return label & return shipping costs: Customer responsibility, including applicable shipping costs to and from Golden Designs
  
• Restocking fee: 20% of the total purchase price for each sauna
  
• Additional return costs: Applicable storage and routing costs also apply
  
• Exchanges: Not accepted
  
• Refund processing: Within 7 days after the return is received, inspected, and approved
  
• Cancellations: Must be requested within 24 hours of purchase and are subject to the 20% handling/restocking fee, applicable storage and routing costs, and applicable shipping costs to and from Golden Designs

Golden Designs, Inc. is a leading North American manufacturer and distributor of infrared sauna systems, with a primary focus on residential units designed for consistent, in-home use. The company develops multiple established sauna product lines, including Dynamic Saunas, Maxxus Saunas, and Golden Designs Saunas, each offering distinct configurations, feature sets, and design approaches to meet a range of space, performance, and user preferences.

Across its portfolio, Golden Designs emphasizes low EMF heating technology, natural wood construction, and space-conscious designs that integrate seamlessly into everyday environments. These systems are built to support reliable, repeatable wellness routines, with a focus on practical usability and long-term performance.

In addition to its sauna offerings, Golden Designs, Inc. also develops cold plunge and chiller systems as part of a broader approach to home-based recovery and performance. Established in 2008, the company operates from a 100,000-square-foot facility in Ontario, California, managing product development, inventory, and distribution across both direct-to-consumer and major retail channels throughout the United States and Canada.

We make every reasonable effort to keep product information accurate. Because some products are updated or fulfilled directly by the manufacturer, specifications, included components, packaging, images, or minor design details may change without notice. If a material change affects an order, SanaVi will review the matter in good faith and work toward a reasonable resolution.

For more information, please see the Manufacturer Product Updates & Specification Changes section of our Terms of Service.

Medical and Safety Warnings:

This system is designed for general wellness and at-home use. Individuals with medical conditions, implanted devices, or specific health concerns should consult a qualified healthcare professional prior to use. Discontinue use if you experience discomfort, dizziness, or pain during operation.

Please follow all instructions provided in your User and Set Up Instructions Manuals for safe setup and use.

*** For important health and safety information, please review SanaVi's Medical & Safety Disclaimer Page before using this equipment.

Need help choosing the right system? Read our Infrared & Traditional Sauna Systems Buying Guide for key comparison points, placement considerations, and practical buying guidance.

If you’re looking to better understand how Infrared and Traditional Sauna Systems work, SanaVi Health Systems offers a dedicated educational section focused on its core mechanisms, practical use, and real-world application. This includes foundational insights into infrared heat, session structure, and routine integration, along with guidance on how sauna systems are used in both home and performance-focused wellness environments.

For broader wellness education, visit the SanaVi Journal Learning Center.